SEMI-SYNTH 3MX: Top selling product
Biostable, semi-synthetic, cutting fluid
SEMI-SYNTH 3MX: Top selling product. Biostable, semi-synthetic, cutting fluid. Outstanding corrosion protection and resistance to bacteria, contains 30% mineral oil and a fungicide. Usually dyed fluorescent, but is also available undyed, red or blue to meet customer's bespoke marketing needs.
SEMI-SYNTH X-7: Extreme pressure version of 3MX. Contains high level of chlorine containing EP additives and silicone free anti-foam. Outstanding low foam properties. Usually supplied dyed green.
SOL15EP: Extreme pressure milky soluble oil. Contains high level of mineral oil, chlorine EP additive and also boron additives for biostability.
SEMI-SYNTH AL405: Product designed specifically for the machining of aerospace aluminium alloys. Low pH value for anti-staining properties, chlorine free, contains synthetic esters for lubricity. Semi-translucent emulsion and high mineral oil content.
SEMI-SYNTH EP400: A product with the highest possible level of chlorine EP additive and synthetic ester without affecting other properties such as corrosion protection and bacteria resistance. This product has very low foaming properties and usually comes dyed blue. Outstanding results on high alloy carbon and stainless steels, titanium alloys and deep hole boring.
SEMI-SYNTH X-23: A chlorine free, extreme pressure product, containing a high level of synthetic esters. This product forms dense milky emulsions, but is highly resistant to bacteria and has outstanding anti-corrosion properties. Outstanding on difficult to machine aluminium alloys and creep feed grinding. The high oil content of this product has also led to solving rusting problems when machining cast iron.
CU-COOL: Product designed specifically for machining copper and copper alloys. The soap-less emulsifiers in this product prevent the formation of copper soaps and therefore good emulsion stability and very low metal staining.
SUPER SYNTH 4: A fully synthetic, solution type product, containing a vegetable oil based lubricity additive. Forms a clear solution in most waters and is useful in areas where a high level of biodegradability is required.
Get in touch
20+
Years of Experience
500+
Satisfied Clients
1000+
Products Offered
The engine oils of modern construction equipment must meet exacting requirements due to a combination of increased power levels and extended service intervals and more stringent emissions standards. The latest Euro 4, 5, and 6 regulations mean diesel engine cars, trucks, buses, excavators, boats, and prime running generators use filtration systems such as Selective Catalytic Reduction and Exhaust Gas Recirculation. Our range of engine oils includes multigrade, and 2 and 4-stroke engine oils and they offer increased engine component life, reduced oil and fuel consumption, and lower particulate emissions. They are suitable for use in Cummins, Caterpillar, MTU, Volvo, and MAN diesel equipment in punishing environments.
©Copyright. All rights reserved.
We need your consent to load the translations
We use a third-party service to translate the website content that may collect data about your activity. Please review the details in the privacy policy and accept the service to view the translations.